Avon Heating Tip: 3 Common Boiler Problems

If you think you may need a Avon heating repair for your boiler, it’s good to know some of the more common problems that can arise. Here at Westland Heating and Air Conditioning, we’ve listed three of the more common boiler problems, the causes, and what to do about them.

No Power

If your boiler has shut down, first check the emergency fuel switch. Sometimes this can get tuned of accidentally, or maybe it wasn’t turned back on after a service. Next, check the controls and pressure gauge to ensure that both are on the correct settings. Consult your owner’s manual if you aren’t sure how to check these. Lastly, check the fuse box for a blown fuse. Call a repair technician if none of these tips work.

Faulty Thermostat

Once you have checked to make sure you have power and that there are no blown fuses are blown, check your thermostat to ensure that it is on the right settings. If that checks out, turn it up a few degrees to see if it just needed to be turned up a little. If that doesn’t work, call a technician. You could have a faulty thermostat or a larger issue.

Clogged Pipes

Every boiler system has a series of pipes that run from your boiler unit to the hydronic radiant system, whether you heat with baseboards or radiant flooring. When there’s a clog, your boiler may not be providing an adequate amount of heat, or no heat all. This could be caused from sediment that hasn’t been flushed, and a technician will need to remedy the situation.

Call Westland Heating and Air Conditioning for all your Avon heating repair needs. We repair all makes and models of boilers throughout the service area, so call us any time for quality repair service!

Tags: , , , , ,

Comments are closed.